RC Cars

Items 1 to 20 of 26 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • 1/10 RC On-Road Mission-D YKM DRB DRIFT Racing Car Chassis Kit

    sku: rcve3301018

    Features:

    • 2 Belt Drive System to achieve fast drifting
    • Front Midship Motor Layout for superb drifting balance
    • Full Counter Drift can be achieved
    • Front and rear CVD
    • Steering angle 45 degrees
    • Low center of gravity to achieve high speed drifting
    • Front and rear metal hydraulic anti-vibration
    Learn More
    From: $83.59

  • 1/10 RC On-Road White WOLF Counter Steering DRIFT Racing Car Chassis Kit

    sku: rcve3301019

    Features:

    • Front: Oneway
    • Rear: Solid Axle
    • Reinforced Plastic
    • High Performance Damper Set
    • Newly designed suspension arms
    • All Spare Parts available.

    Remark: Assembled version photos are for reference only.

    Learn More
    From: $83.41

  • 1/10 RC YKM Type C SD EP Shaft Drive Drift Car Chassis Kit

    sku: rcve3301014


    Features:

    • Designed for Drift
    • Parts compatible with Yokomo Type C Chassis Drift Package Plus
    • Fully adjustable double wishbone suspension, Adjustable aluminium dampers
    • Universal drive shafts
    • Aluminium diff joint ring, Aluminium motor mount
    • Large Battery cabin
    • Shaft Driven
    • Assembled photo for reference only; Tyre & Wheel may come in different style

    Learn More
  • 1/10 RC YKM DIB EP Belt Drive Racing DRIFT Car Chassis Kit

    sku: rcve3301021

    Feature:

    • 2-Belt drive for ultimate drivability
    • Front mid-ship motor layout
    • Ackerman ratio for full counter steer drifting
    • 45 degree steering angle
    • Super low center of gravity design for optimal handling performance
    • Steel turnbuckles and tie-rods
    • Plastic front and rear bulkheads (single-piece bulkhead cap)
    • Front one-way
    • Bell crank system
    • NiCd, NiMH, LiPo compatible battery holder

    Learn More
    From: $89.16

  • 3Racing SAKURA Ultimate 1/10 RC R/c EP Racing On-Road Touring Car Kit

    sku: rcve5501006

    Features:

    • New Front A Arms with Revised geometry and materials.
    • New Dual Bellcrank Steering System with Revised Ackermann geometry.
    • Standard Front SSK Driveshafts for smoothest power delivery to front wheels.
    • New Rear A Arms with Revised geometry, materials and reinforcing ribs.
    • New Rear Hubs/Uprights with outboard Toe-In.
    • Symmetric Front and Rear wheel axle height.
    • Front and Rear Anti Roll Bar tweak adjustments.
    • Dual Rear Anti Roll Bar Ball Cap mounting positions on A Arm.
    • Hex Shaped Shock Spring Tensioned/Ride Height Adjusters for easier grip.
    • One piece center mount over hanging servo mount.
    • Center Front Body Support for lightweight bodies.
    • 5x10 Oversized Center Layshaft Bearings.
    • Hard Coated Alum 20T Center Belt Pulleys.
    • One piece Machined Spur Adaptor.
    • New 40T Differential Pulleys.
    • Precision Machined 7075 Aircraft Grade Alum Front and Rear Bulkheads and Covers.
    • Differentials raised allowing optimum driveshaft angle.
    • Redesigned Motor Mount allowing wider range of gear ratios from 15 to 33T on a 48P 85T Spur at a final drive ratio of 5.15 to 11.33.
    • Imported ultra-smooth and durable Bando Drive Belts.
    • Premium Grade 3.5mm Graphite Shock Towers.
    • 3 Racing’s ‘Factory Racing Products’ Spec PTFE Coated Hardened 7075 Alum Ball Heads and Shock Bodies.
    • Upper Deck Belt Stabilizer.
    • New Composite Adjustable Battery Mounts with Precision Positioning System.
    • Battery Strap Mounting System eliminates the need for fiber tapes.
    • Ultra Fit Composite Servo Horn.
    • Two Piece Rear Front A Arm Pivot Pin Mounts.
    • New Composite Front Spool with Replaceable Drive Cups.
    • 2.25mm Main Chassis.
    • 2mm X Cut Upper Chassis.
    Learn More
  • 3Racing SAKURA XI Sport 1/10 RC R/c EP Racing On-Road Touring Car

    sku: rcve5501004

    Features:

    • Raised Bulkheads
    • Motor Mount Moved Closer to Chassis Center
    • Motor Moved 3mm Forward
    • Center Bulkhead Allows Upper Deck Capturing
    • Narrower Center Bulkheads
    • New Rear Bulkhead with Integrated Belt Stablizer
    • Front and Rear Belt Tension Adjustment without Removing Bulkhead Cover
    • Upper Camber Link Length Adjustments in 1mm Increments
    • New Stiffer and Shorter Rear Arms
    • Narrow chassis
    • 4 Point Battery Positioning System
    • Down Stop Plates Deeper into Chassis
    • Unique Double Layered Dual Bell Crank Desgin
    • Bell Crank Centering Lock
    • Larger Foam Bumper Supporting Shell Bumper
    • Updated Short Rear Shock Tower
    • Rear Fluid Filled Gear Differential
    Learn More
  • 3Racing SAKURA D3 CS Sport 1/10 RC R/c EP Racing DRIFT Car

    sku: rcve5501002

    Features:

    • Weight Distribution
    • Steering
    • Drivetrain
    • Suspension
    • Oil Filled Coil Spring Shocks
    • Wide Angle Driveshafts
    • Molded Rear Diffuser
    • 80T 48P Spur
    • 3 Degrees Rear Toe-In
    • Composite Molded Chassis

    Learn More
    From: $102.02

  • Eurgle 2.4Ghz 1/18 RC Brushless Metal Shock 4WD RC18T RTR EP TR-V5 Buggy

    sku: rcve5402005

    Features:

    • Front and Rear wheel can be adjusted Toe-in and Toe-out
    • Front and Rear wheel can be adjusted Camber
    • Front and Rear wheel can change Caster 0-15 degree
    • Ground Clearance is adjusted
    • 25A Brushless ESC (burst current 90A)
    • Fully 4 Wheel Drive (4WD).
    • Real oil-filled shocks for smooth, consistent damping, front and rear.
    • Nylon with fiberglass Plastic Chassis
    • With the Double Suspension Arm to increase its stability & Resistance
    • With Ball Bearing Differential, outdrive Completely Equipped With Ball Bearings
    • CVD front Driving Draft.
    • Column Steering System
    • Equip With  Aluminum-alloy Shock(Brush version equipped with plastic shocker)
    • Adopt Natural Rubber Tires
    • Aluminum Dog bones.
    • Full axles of rotation are made of aluminum alloy.
    • Anti-skid and anti-wear rubber tire.

    Learn More
  • Eurgle 2.4Ghz 1/18 RC Brushless Metal Shock 4WD RC18T RTR EP V6 Truggy

    sku: rcve5402001

    1 Review(s)
    Features:

    • Front and Rear wheel can be adjusted Toe-in and Toe-out
    • Front and Rear wheel can be adjusted Camber
    • Front and Rear wheel can change Caster 0-15 degree
    • Ground Clearance is adjusted
    • 25A Brushless ESC (burst current 90A)
    • Fully 4 Wheel Drive (4WD).
    • Real oil-filled shocks for smooth, consistent damping, front and rear.
    • Nylon with fiberglass Plastic Chassis
    • With the Double Suspension Arm to increase its stability & Resistance
    • With Ball Bearing Differential, outdrive Completely Equipped With Ball Bearings
    • CVD front Driving Draft.
    • Column Steering System
    • Equip With  Aluminum-alloy Shock(Brush version equipped with plastic shocker)
    • Adopt Natural Rubber Tires
    • Aluminum Dog bones.
    • Full axles of rotation are made of aluminum alloy.
    • Anti-skid and anti-wear rubber tire.

    Learn More
  • 1/10 RC On-Road Pre-Motor THE DEVIL DRIFT Racing Car Chassis Kit

    sku: rcve3301015

    1 Review(s)

    Features:

    • FF, FR, 4WD Convertible.
    • Three Belts Drive
    • Horizontal / Vertical Battery Mount
    • Oil Alloy Suspension.
    • Front and Rear CVD
    • 13° Caster
    • Pre-Motor Front Design
    • R31 Steering System
    • Durable Plastic Chassis

    Learn More
    From: $89.16

  • 2.4Ghz 1/18 R/C Brushless Metal Shock 4WD RC18T RTR EP TR-V9 Racing Rally Truck

    sku: rcve5402006

    Features:

    • Front and Rear wheel can be adjusted Toe-in and Toe-out
    • Front and Rear wheel can be adjusted Camber
    • Front and Rear wheel can change Caster 0-15 degree
    • Ground Clearance is adjusted
    • 25A Brushless ESC (burst current 90A)
    • Fully 4 Wheel Drive (4WD).
    • Real oil-filled shocks for smooth, consistent damping, front and rear.
    • Nylon with fiberglass Plastic Chassis
    • With the Double Suspension Arm to increase its stability & Resistance
    • With Ball Bearing Differential, outdrive Completely Equipped With Ball Bearings
    • CVD front Driving Draft.
    • Column Steering System
    • Equip With  Aluminum-alloy Shock(Brush version equipped with plastic shocker)
    • Adopt Natural Rubber Tires
    • Aluminum Dog bones.
    • Full axles of rotation are made of aluminum alloy.
    • Anti-skid and anti-wear rubber tire.

    Learn More
  • 2.4Ghz 1/18 R/c Brushless Metal Shock 4WD RC18T RTR EP V7 Racing Touring Car

    sku: rcve5402004

    Features:

    • Front and Rear wheel can be adjusted Toe-in and Toe-out
    • Front and Rear wheel can be adjusted Camber
    • Front and Rear wheel can change Caster 0-15 degree
    • Ground Clearance is adjusted
    • 25A Brushless ESC (burst current 90A)
    • Fully 4 Wheel Drive (4WD).
    • Real oil-filled shocks for smooth, consistent damping, front and rear.
    • Nylon with fiberglass Plastic Chassis
    • With the Double Suspension Arm to increase its stability & Resistance
    • With Ball Bearing Differential, outdrive Completely Equipped With Ball Bearings
    • CVD front Driving Draft.
    • Column Steering System
    • Equip With  Aluminum-alloy Shock(Brush version equipped with plastic shocker)
    • Adopt Natural Rubber Tires
    • Aluminum Dog bones.
    • Full axles of rotation are made of aluminum alloy.
    • Anti-skid and anti-wear rubber tire.

    Learn More
  • 2.4Ghz 1/18 R/c Brushless Metal Shock 4WD RC18T RTR EP V7D Racing DRIFT Car

    sku: rcve5402003

    Features:

    • Front and Rear wheel can be adjusted Toe-in and Toe-out
    • Front and Rear wheel can be adjusted Camber
    • Front and Rear wheel can change Caster 0-15 degree
    • Ground Clearance is adjusted
    • Front Diff. Back one-way, Front wheel camber is 3 degree, back wheel is 0 degree
    • 25A Brushless ESC (burst current 90A)
    • Fully 4 Wheel Drive (4WD).
    • Real oil-filled shocks for smooth, consistent damping, front and rear.
    • Nylon with fiberglass Plastic Chassis
    • With the Double Suspension Arm to increase its stability & Resistance
    • With Ball Bearing Differential, outdrive Completely Equipped With Ball Bearings
    • CVD front Driving Draft.
    • Column Steering System
    • Equip With  Aluminum-alloy Shock(Brush version equipped with plastic shocker)
    • Adopt Natural Rubber Tires
    • Aluminum Dog bones.
    • Full axles of rotation are made of aluminum alloy.
    • Anti-skid and anti-wear rubber tire.

    Learn More
  • 1/18 Brushless Motor 4WD RC18T ARR EP RC Truck / Buggy

    sku: rcve3301016

    Features:

    • 25A Brushless ESC (burst current 90A)
    • Fully 4 Wheel Drive (4WD).
    • Real oil-filled shocks for smooth, consistent damping, front and rear.
    • Each of the four lower suspension arms are identical and interchangeable, front to back and right to left.
    • Aluminum Dog bones.
    • Aluminum Main Shaft.
    • Ball differential gear is applied on front/rear wheel.
    • Adjustable hydraulic pressure aluminum alloy shock absorber.
    • Full axises of rotation are made of aluminum alloy.
    • Anti-skid and anti-wear rubber tire.
    • Ball bearing is applied on the car.

    Learn More

    From: $102.46

    To: $144.09

  • 1/18 RC EP XR 4WD On-Road Belt Drive Racing Car Aluminum Chassis

    sku: rcve00048

    Features:

    • Two-belt 4WD racing machine efficiently transfers power to traction regardless of changes in torque levels.
    • Design maximizes the advantages of the belt drive through effective control of counter-torque and mass balance.
    • Design allows ball diff to be adjusted without the removal of any parts.
    • Full ball bearing specifications.
    • Ideal chassis dimensions realized with calculated length for front and rear bulkheads.
    • Design optimizes drive characteristics and suspension geometry for rubber tire specs.
    • Choice of one-way of spool (rigid) for front diff.

    Learn More
  • 1/10 RC TEH-R31 EP 3-Belt Drive Drift Car Chassis Kit

    sku: rcve3301006

    8 Review(s)
    Features:

    • Designed for Drift
    • Pre-Motor Design
    • Large Battery cabin
    • Come with Diamond Cut 5 degree Tyre & 4 Spoke Wheel
    • 3-Belt Driven

    Learn More
  • 1/10 RC EP XR 4WD On-Road Belt Drive Racing Car Aluminum Chassis

    sku: rcve00047

    Features:

    • Two-belt 4WD racing machine efficiently transfers power to traction regardless of changes in torque levels.
    • Design maximizes the advantages of the belt drive through effective control of counter-torque and mass balance.
    • Design allows ball diff to be adjusted without the removal of any parts.
    • Full ball bearing specifications.
    • Ideal chassis dimensions realized with calculated length for front and rear bulkheads.
    • Design optimizes drive characteristics and suspension geometry for rubber tire specs.
    • Choice of one-way of spool (rigid) for front diff.

    Learn More
  • 3Racing SAKURA D3 CS Sport 1/10 RC R/c EP Racing DRIFT Car Assembled (Upgraded)

    sku: rcve5501005

    Features:

    • Key parts have been upgraded to Japanese Carbon Fiber.
    • Weight Distribution
    • Steering
    • Drivetrain
    • Suspension
    • Oil Filled Coil Spring Shocks
    • Wide Angle Driveshafts
    • Molded Rear Diffuser
    • 80T 48P Spur
    • 3 Degrees Rear Toe-In
    • Composite Molded Chassis
    Learn More
  • 3Racing 1/10 Formula 1 Racing Car w/ Speed Passion Reventon S Brushless System ESC 17.5R #KIT-F113SP

    sku: rcve5501003_k

    Features:

    • 2.5mm Main Chassis and 2mm Upper Chassis machined using imported premium grade woven carbon graphite
    • Front 7075 alum bulkhead
    • Front Double Wishbone Suspension
    • Front Independent Dampers
    • Front Droop adjustment
    • Ultra flexible impact resistant rear wing and front wing mount
    • Pivot Ball Rear Pod design with side springs and drag link
    • Standard or Low Profile Servo
    • Rear Axle Height adjustments in 0.5mm increments
    • Ultra low CG 7075 Alum motor mount and bulkhead for Brushed and Brushless motors
    • 1/12th specs 1/4" rear axle and differential with 1/8" diff balls
    • Processed hardened steel diff plates
    • Symmetric stroke through shaft design Coil Spring Oil Filled Dampers all round, 3 standard and one oversized center damper for superior shock absorption
    • PTFE Coated Hardened Alum Damper bodies and ball stud.
    • Adjustable battery pack stoppers – standard or shorty Lipo packs ready
    • Centralized weight distribution
    • Camber caster adjustable
    • Reactive caster adjustable optimized for carpet racing
    • Complete rolling chassis with tire and body set
    • Titanium Turnbuckles
    • First kit from 3 Racing to bare the "Factory Racing Products" label
    Learn More
  • 3Racing SAKURA ZERO S 1/10 RC R/c EP Racing Touring Car Kit

    sku: rcve5501001

    Fetures:

     

    • 2.5mm FRP chassis is specially made for Sub-C battery, drivers can change to use Li-po by their own preference.
    • The chassis is cut uniquely based on FRP 's characteristics, hardness and durability are highly boosted.
    • Both the front and rear shock tower are made of 3.0mm FRP, there are 4 settings and 6 settings for adjusting damper angles at the front and rear respectively.Motor mount is made from CNC machined aluminum for hardness and durability, resulting in good heat loss performance. Anodized pink body makes it look remarkable.
    • Two belt system provides quiet and smooth run.
    • Differential is of lightweight design for competition use.
    • Universal shaft and dog bone are made of steel, which greatly boost its hardness and durability.
    • The chassis is equipped with 16 pieces ball bearing with different sizes, which makes the car runs smooth with best performance.
    • Turn buckle is made from steel with extreme stiffness, its counterclockwise design is easy for adjustment.
    • Battery tray contains two adapters for Sub-C battery and Li-po battery, a battery strap is included for fixing the battery position.
    • 4 suspension mounts with one additional 3 degree suspension mount are consisted, they are made from rigid nylon material for competition use.
    • Plastic Damper continuously usesthe design of SAKURA ZERO.
    • Ball stud set up is applied to entre chassis.

    Learn More

Items 1 to 20 of 26 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2