The feature of this glider is small in packing! The main wing is assembled with 4 panels and the fuselage in 2 pieces which can dramatically make the packing much smaller than usual glider with 3 meters wingspan.
The angles of the main wing panel are NOT at the conjuctions which means that there is no hassle with the installation when assemble the main wing. The angles have been set! Easy for customers!
As the main wing is long, we have already install the servo wires before putting the covering to the frame. Easy for customers!
.As usual, this glider fuselage is made of light but durable epoxy fiberglass with high quality balsa wood covered with top level Oracover plastic film. It is 100% fulfil safety requirement and no trouble with copy right issue about chinese made covering.
The top and bottom face of the wing with different color pattern for easier recongising the direction of the glider. Motor, ailerons and tail wing are fully controllable!
Recommended motor for this glider is 850rpm/v D3648 brushless motor with 60A ESC and 12 x 13" folder propeller. They are also available upon request!
- 4 Panels Main Wing
- Fuselage can be disassembled in 2 pieces.
- No hassle with the main wing angles as all pre-set!
- Much smaller packing comparing with other 3 Meters Gliders!
- Rear in the market!
- Strengthen fuselage - with 4 more layers of fiberglass clothes.
- Excellent outlook - carbon fiber canopy !
- The Streamlined fuselage is made of fiberglass and comes with control-rods already factory-installed.
- Conventional Rib & Spar frame structure wing and tail-surfaces, covered with quality plastic film. Easy to assemble and repair. And those wings are made of high quality of balsa wood. It provides very light weight for the whole plane.
- Easy to assemble and dis-assemble for transportation.
- Hands-off stability when trimmed properly.
- Most of necessary components(screws & servo horns) are included.
|Wing Area (dm. sq)||76.5|
|Wing Load (g / dm sq)||34|
|Fuselage Length (mm)||1460|
|Wing Material||Balsa Wood|
|Fuselage Material||Epoxy Fiberglass|
|Number of Servo||4 (Optional)|
|Recommended Motor||D3648 850rpm/v Brushless Motor (Optional)|
|Recommended ESC||80A (Optional)|
|Propeller||12 x 13"|
|Recommended Battery||4S LiPo (Optional)|
|Recommended Radio||4 Channel (Optional)|
|Net Weight (kg)||1.770|
You may also be interested in the following product(s)
4Ch RC EP 2M D-Box Pro Wing Raptor-Glider 2000 Advance ARF Electric Aerobatic Thermal Glider Sailplane