Battery & Charger

Items 1 to 20 of 25 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • GT Power C607D 7A/80W Dual Power AC/DC Microprocessor Controlled High Performance Rapid Charger / Discharger

    sku: rcbc4847002

    Features:

    • Capacity Limit
    • Maximum safety
    • Temperature monitoring
    • Input power monitoring
    • Easy to program buttons
    • 5 battery memory
    • Individual cell monitoring
    • 2-Line Back lit LCD display
    • Built in Balancer to 6S packs
    • Cycle charging/discharging
    • Includes "FAST" & "STORAGE" Li-xx programs
    Learn More
  • RadioLink CB86 Professional RC Model LiPo Battery Balance Charger

    sku: rcbc5747001

    Features:

    • Absolutely balance charger.
    • Eight battery packs charging at one time.
    • Patent technology charge port, compatible with 1S~6S LiPo/LiFePo battery packs.
    • Independent balance charge for every single battery cells.
    • Support maximum 6A charge current for 6 battery cells, finish the charge asps, save time for you.
    • 0.006V precision voltage detection and 0.01A precision current control.
    • Self working current 70mA, only 40% of other bland balance chargers!
    • Special 3.0 inch LCD screen, display every battery cell’s charging status, and easy to set it.
    • Self protection, wrong input power polarity the charge will not work, low and over voltage input power warning, and wrong output charge polarity will not charge the battery.
    Learn More
  • SKYRC T6200 Professional Balance Charger / Discharger / Battery Meter / Motor RPM Tester / Servo Tester

    sku: rcbc1047003

    Feature:

    • Touch System
    • Charging Status Monitor
    • Microprocessor Controlled
    • High-powered and high-performance circuit
    • Terminal Voltage Control
    • Maximum Safety Protection
    • Lithium Battery Meter
    • Motor RPM tester
    • Servo tester
    • PC Control Software “Charge Master”
    • Multi-language and four color theme optional
    Learn More
  • UNRC Second Generation R/c UN-A6 Plus 6S LiPo Battery 200W Balance Charger

    sku: rcps3347004

    Features:

    • Input voltage could be displayed in this battery charger.
    • Dynamic balance function is added to adjust the charging current to shorten charging time according to cell voltage.
    • Two this UN-A6 chargers could be combined to compose one 12S charger and even share one input power.
    • Voltage precision: +/- 2mV, current precision: 0.1A. Just charging finished voltage deviation is less than 5mV.
    • Can division-charge 2-6S lipo battery packs.
    • Can simutaneously charge 3x2S, 2x3S, 1x6S battery packs.
    • Provide a full protection to the electric circuit, including input overvoltage protection, over-heat temperature, input anti-connection protection,output anti-connection protection and output damage protection.
    • Fully automatic temperature control of radiating design.When the internal of the charger is not over heat, the radiator fan will not be activated, which has proven the quiet charging environment.
    • 6 charging circuit works separately, no interactively interference.
    • When CPU detects voltage in a channel has reached the default value, the charging circuit of this channel will be locked and stop working, so you do not have to worry about the batteries will be over charged.
    • Maximum 8A charging current (0.3A-8A adjustable) 
    • Input reqirment: DC 12V-14V/>12A
    • Five working modes make it be more stong in charging.
    Learn More
  • iMax RC QUAD 4B6 06 Pro Intelligent Balance Charger

    sku: rcps3347007

    Features:

    • High Performance Micro Processor
    • Individual Voltage Balancer
    • Suitable for various types of Lithium batteries
    • Maximum safety
    • Processing time limit
    • Data store / load
    • High-power and high-performance circuit
    • Optimized User Interface
    • Balancing individual cells battery discharging
    • Lithium battery Fast and Storage mode
    • Temperature threshold (Optional)
    • Input power monitoring
    • Cyclic charging / discharging
    Learn More
  • Coolook LiFePO4 Rechargeable AA / AAA Battery Charger

    sku: rcbc3947001

    Features:

    • Two independent charging channels for up to two AA or AAA LiFePO4 cells
    • Universal Input: AC 100-240V 50-60Hz
    • Output: DC 3.65V 300mA x 2 AA / AAA
    • Quick charge with automatic cutoff (about 2 hours for two AA)
    • Red LED indicators light up while charging, turn green upon completion
    • Very compact design
    • With standard IEC power receptacle, power supply cord of American, European, UK and Australian plug can be bought separately in the Accessories section.
    Learn More
  • iMAX B6 Multifunctional Lipo Lithium Polymer NiMH NiCd Balance Battery Charger

    sku: rcps3347001

    Features

    • AUTO-Cut function for charging and discharging.
    • Internal independent Lithium battery balancer
    • Suitable for multiple types of battery such as lipo, Nimh and etc.
    • Maximum safety - will stop charging when battery's voltage exceeds the threshold
    • Automatic charging current limit
    • Capacity limit
    • Processing time limit
    • Input power monitoring
    • Data store / load
    • Cyclic charging / discharging
    Learn More
  • SKYRC RacingStar RS16 LiPo NiMh LiFe Battery Super-compact Portable Balance Charger / Discharger

    sku: rcbc1047010

    Feature:

    • Compact and Unique Design, the size of SKYRC RS16 is 92x111.4x50mm which makes this product a super-compact portable charging system
    • Smart Cooling Fan, the fan is ON/OFF automatically according to the internal temperature.
    • Two DC inputs, There are two DC inputs, one (XT60 Type )is located in the right side of the charger and the other (banana plug type) is located in the bottom.
    • Direct Plug Docking System, there is a DC output on the bottom of the charger and it is designed for docking into the eFule 230W 13.8V Switch DC Power Supply.
    • Maximum Safety
      • Automatic Charging Current Limit
      • Capacity Limit
      • Temperature Threshold
      • Processing Time Limitan
    • Battery Meter, up to 10 different charge/discharge profiles.
    • Terminal Voltage Control
    • Memory Preset
    • PC Control
    Learn More
  • SKYRC 6X80+ BLUE VERSION LiPo NiMh LiFe Battery Charger / Discharger

    sku: rcbc1047009

    Feature:

    Optimized Operating Software
    SKYRC 6x80 Plus features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

    Internal Independent Lithium Battery Balancer
    SKYRC 6x80 Plus employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

    Balancing Individual Cells Battery Discharging
    During the process of discharging, SKYRC 6x80 Plus can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

    Adaptable to Various Type of Lithium Battery
    SKYRC 6x80 Plus is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries.

    Fast and Storage Mode of Lithium Battery
    Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.

    Cyclic Charging/Discharging
    1 to 5 cyclic and continuous process of charge>discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity.

    Data Store/Load
    The charger can store up to 10 different charge/discharge profiles for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

    Terminal Voltage Control(TVC)
    The charger allows user to change the end voltage.

    Lipo Battery Meter
    The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage.

    Motor RPM Tester
    Users connect the sensor motor and charger with sensor wire, set the pulse width and test the RPM of the motor.

    Servo Tester
    Connect the servo and the charger with wire, change the pulse width value and check whether the servo works or not.

    Re-Peak Mode of NiMH/NiCd Battery
    In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged, and for checking how well the battery receives fast charges.

    Delta-peak Sensitivity for NiMH/NiCd
    Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

    Automatic Charging Current Limit
    You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.

    Capacity Limit
    The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

    Temperature Threshold*
    The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.

    Processing Time Limit:
    You can also limit the maximum process time to avoid any possible defect.

    PC Control Software “Charge Master”
    The free “Charge Master” software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from “Charge Master”.

    APPS for Smart Phone (both iOS and Android)
    Finally, your charger gets its own apps. This charger can be controlled and operated by smart phones.

    Learn More
  • SKYRC AC/DC QUATTRO MICRO 4X1 cell LiPo Battery Charger

    sku: rcbc1047007

    Feature:

    • 4 Independent Ports.
    • Dual Power AC/DC Input.
    • 4 different kinds of battery connectors.
    • 4 digital LED Message Display.
    Learn More
  • SKYRC B6AC+ V2 AC/DC Processional LiPo NiMh LiFe Battery Balance Charger / Discharger

    sku: rcbc1047006

    Feature:

    • Upgraded version of B6AC+ V1.
    • More accurate and stable than B6AC+ V1.
    • Dual Power AC/DC Input.
    • 2-6S XH Plug-in Balance Sockets.
    • Individual-cell-voltage balancer employed.
    • Store up to 10 different charge/discharge profiles.
    • Battery Voltage & Resistance Meter inclubed.
    • The charger allows user to set the charge/ discharge end voltage.
    Learn More
  • SKYRC iMAX B6mini Processional LiPo NiMh LiFe Battery Balance Charger / Discharger

    sku: rcbc1047005

    Feature:

    • Upgraded version of IMAX B6.
    • The power and charge current are 20% up than B6.
    • Compact Design.
    • 2-6S XH Plug-in Balance Sockets.
    • Individual-cell-voltage balancer employed.
    • Store up to 10 different charge/discharge profiles.
    • Battery Resistance Meter inclubed.
    Learn More
  • SkyRC 1000mA LED AAA NiMh Battery Discharger

    sku: rcbc1047004

    Features:

    • Eliminate memory effect of NiMH cells and maximize battery life.
    • Four independent discharging slots.
    • LED indicators for easy check of discharging status.
    • 1000mA current for fast discharging.*
    • Aluminum case for superior heat dissipation.
    • Screw type battery terminal is comfortable to fix battery.

    *Discharging time will vary depending upon the brand, capacity, and condition of batteries being discharged.

    Learn More
  • SKYRC RC R/c AA / AAA Bluetooth Advanced LCD Display Battery Charger & Analyzer

    sku: rcbc1047001

    Feature:

    • All New Design
    • Larger LCD Display
    • Innovative Bluetooth Talk
    Learn More
  • SKYRC T6755 AC/DC Micro Processor Touch Control Fast LiPo NiMh LiFe Battery Balance Charger / Discharger

    sku: rcbc1047002

    Feature:

    • Touch System
    • Charging Status Monitor
    • Microprocessor Controlled
    • High-powered and high-performance circuit
    • Terminal Voltage Control
    • Maximum Safety Protection
    • Battery Meter
    • PC Control Software “Charge Master”
    • Multi-language and four color theme optional
    Learn More
  • UNRC R/c UN-A9 Plus 6S LiPo Battery 300W Balance Charger

    sku: rcps1047001

    Features:

    • 9 independent built in charging circuits.
    • Maximum output power - 300W
    • The new algorithm, higher charging efficiency
    • The new menu and data set
    • Support charging assistant, and cascade charging function
    • The new shell design with double ball bearing fan
    • Charge current setting range 0.2A ~ 8A step 0.1A, voltage accuracy + -5 mV
    Learn More
  • UNRC MAX5A A6 Plus LiPo Battery 8 interface Charger Assistant

    sku: rcps3347005

    Features:

    • The latest edition of nurse removed in2 interface!
    • The latest design array voltage driving circuit is very good replaced relay does not exist switch life.
    • Lossless transmission design, using a low resistance of MOS tube sheet resistance only only six milliohm and reduce the transmission pressure drop can realize large current charging, nanny can directly tow 5 a above the charging current.
    • Support multiple groups of battery, 2 s cell 24 groups, 3 s cell 16 group, 6 s cell 8 group. The new circuit and process greatly lodge small volume.
    • Join professional discharge circuit can access all of the battery every S separate discharge, can put the voltage unbalance of the battery set level.
    • Can be set by the discharge voltage (1.5 V to 4.2 V step 0.01 V), can be installed freely.
    • Be clear at a glance of the work of the state, a panel switch group lamp, put circuit indication
    • Safe and reliable design, internal anti joint protection, reverse connect the battery will not cause damage, joined the charger patrol function to UN charger for safety monitoring if found charger doesn't work properly 5 seconds cut off all battery, prevent accident.
    • Reserve two kinds of data input interface, compatible UN - A6 new and old version of the solid, (discharge function must be new solid can drive up) no button design automatically detects data line input port.
    Learn More
  • FT680 AC 1-6s LiPo LiFe NiMh NiCdMulti-Chemistry Balance Charger / Discharger

    sku: rcps3347006

    Features:

    • Optimized Operating Software
    • Internal independent Lithium Battery Balancer
    • Balancing individual cells battery discharging
    • Adaptable to various type of Lithium Battery
    • Fast and Storage mode of Lithium Battery
    • Delta-Peak Sensitivity
    • Automatic charging current limit
    • Fully protect battery : Capacity limit, Processing Time limit, Input Power Monitoring
    • 5 Batteries data storage for user convince
    Learn More

Items 1 to 20 of 25 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2